Copyright © 2019
–
2020 DARE!! Products
Page 4
1.1
LASER Safety
The Radi
L
ink
®
uses lasers for the analogue and digital data transmission. The
plug-in card transmits laser light, through a fibre optic cable, to the remote unit.
The remote unit transmits both analogue and digital data through 2 fibres.
The maximum laser output power of each laser is 5 mW at the output ports. The
wavelengths of the LASER light are 1310 and 1550 nm respectively. This light is
invisible to the human eye.
The Radi
L
ink
®
is a fiber coupled system and a closed system. Therefore, it is
classified as a class 1M LASER product, according to EN60825-1:2014 and
EN60825-2:2004. It is mandatory to check the fibre connections before turning
on the system.
According to EN60825-2, the Radi
L
ink
®
is equipped with an Automatic Laser
Shutdown in case of a disconnection or other interruption of the laser
connection between the plug-in card and remote unit. In this case the lasers are
deactivated within milliseconds.
Connect and check all fibre cables before switching on the system.
Do not attempt to switch on the system if the fibre optic cables
show any sign of damage.
NEVER look into any of the fibre optic connectors. The LASER emits
light, invisible to the human eye. Looking into the fibers or laser
connectors while activating the lasers may cause permanent eye
damage.
