Dare RadiLink RLK2008A, Operating Manual

Page: 20 / 25

Copyright © 2019 – 2020 DARE!! Products Page 20
can be: "ON" or "OFF".
MEAS?<space>LSRTEMP
Get the measured laser
temperature in degrees
Celsius.
<temperature>
For example: "35.6".
MEAS?<space>LSRCURR
Get the measured laser
current in Amperes. <laser current>
For example: "0.051".
MEAS?<space>INT
Get the measured voltage
of the internal supply in
volt.
<supply voltage>
For example: "14.400".
MEAS?<space>EXT
Get the measured voltage
of the external supply in
volt.
<supply voltage>
For example: "12.000".
SUPPLY<space> INT Switches the remote unit to
internal battery. OK or Error code.
SUPPLY<space> EXT Switches the remote unit to
external power supply. OK or Error code.
RF<ch>
Set the RF switch to the
<ch> channel.
<ch> can be 1
– 8.
Note: channel is active
350ms after this command
is acknowledged by the
RadiLink. OK or error.
RF?
Returns which channel is
selected.
For example: 3.
GAIN<space><gain>
Set the gain of the system.
<gain> can be STD or HIGH.
OK or error.
GAIN? Returns the gain setting.
<gain> can be:
STD for typical 0 dB gain.
HIGH for typical 20 dB gain.
INFO?
Returns additional error
states. <error>
For example: "ERROR 35".
Command Description Reply
BIAS<ch><space>
STATE,<state>
Turn the supply of a
channel on or off.
<state> can be ON or OFF.
OK or error.
BIAS<ch>? <space>
STATE
Returns the state of the
bias channel.
<state> can be ON or OFF
or error code that the
current limit has occurred.
ON or OFF or error.
BIAS<ch><space>
SOURCE,<source> Select the bias source.
<ch> can be 1
– 8.
OK or error.