Dantherm Silencio 600, Service Manual

Page: 35 / 87

35
018717 • Version
1.1 • 23.01.2007
Accessories
Introduction
This section will give you an overview of the available accessories for Silencio. You will
find a list of accessories as well as a short description including part number for
ordering.
Additional information is available on each accessory, please contact Dantherm Air
Handling A/S.
List
Here is the complete list with drawing, description and part number for all available
accessories for Silencio:
Accessory Illustration Description Part no.
Male SUB-D 25W connector and
25 free wires supplied with
terminal ends.
Wire No. 5 and wire No. 12 are
connected to each other through a
terminal block.
See more about the SUB-D-
signals in section “Description of
parts”, page 11
016356
Two male SUB-D 25W connector
mounted.
See more about the SUB-D-
signals in section “Description of
parts”, page 11
016359
Alarm Cable
One male SUB-D 25W connector
mounted and a connection box
with 23 terminals block.
See more about the SUB-D-
signals in section “Description of
parts”, page 11
016360
Filter guard Comprises a pressure switch
control gauging the air pressure
before and after the filter. When
the filter gets dirty, the pressure
difference will go above the switch
setting and activate the alarm
lamp on “warning” level. This is to
indicate that if not replaced the
filter will clog with reduced cooling
capacity as a result.
20-200:
013038
50-500:
014568
Continued overleaf