28
Mounting,
continued
Procedure,
continued
Step
Action
9
Seal the top of the unit with fluid
sealant
Loosen the pallet underneath the
Silencio unit by removing the 2
mounting brackets in each side of
the unit.
Be careful when the pallet falls
down
10
Mount the two support brackets on
the wall brackets by tightening the:
•
upper bolt (enclosed) that goes
through both the bracket and
the bracket fitting
c
•
lower bolt (enclosed)
d
.
This bolt makes it possible to
fine adjust the height of the
bracket
11
Tighten (optional) the unit with
screws. 2 screws on each support
bracket at the bottom
Mounting holes
Continued overleaf
d
c
