66
How to replace the phase reversal monitor
Introduction
The phase reversal monitor protects the compressor against overload.
When to replace
The phase reversal monitor only needs to be replaced when it is faulty.
Part number
The phase reversal monitor can be ordered under part number 296082.
Tools
Make sure you have the following tools available before you start:
•
Cross-point screwdriver
•
Torx 25 screwdriver
Caution!
•
Only trained and certified technicians are allowed to replace parts.
•
Switch of both the DC and AC supply before working on the unit.
•
Make sure that all work has been performed before switching on the power again.
This drawing illustrates the phase reversal monitor and where it is placed in the unit.
Illustration
Continued overleaf
