69
018717 • Version
1.1 • 23.01.2007
How to replace the thermostat for the heating element,
continued
Procedure
Follow these steps to replace the thermostat:
Step
Action
1
Switch of all the power to the unit
2
Remove the upper left side cover by unscrewing the two torx 25 screws that
hold it/them in place
3
Disconnect the two cable logs by pulling them carefully apart
4
Remove the two aluminum pop rivets with the side-cutting nippers
5
Mount the new thermostat with the two enclosed pop rivets
6
Connect the two cable logs
7
Remount the side cover
8
Connect the power
Result: The test program runs through all functions.
Check that the unit does not come out with an alarm signal.
In case of an alarm signal, please see section “Fault finding guide”, page 71