SERVICE
6
MAGNET POWER SUPPLY SYSTEM 8500
UART HW SET UP.
In the “UART HW SETUP” mode the baud rate and associated parameters for the serial lines can
be set.
SW2 selects which line to set up.
Hint: Selecting SW2 will immediately display the present setting on the green LEDs left to SW1.
Parameters
Default setting after “COLD BOOT”
Local Line:
9600Baud, No party, 8 Bits, 2 Stop bits
Remote Line:
9600Baud, No party, 8 Bits, 1 Stop bits
DANFYSIK A/S - DK 2630 TAASTRUP - DENMARK.
DOC NO P80303Sk