Danfoss VLT FC 103, Programming Manual

Page: 34 / 203

0-37 Display Text 1
Range: Function:
0
*
[0 -
0 ] In this parameter it is possible to write an individual
text string for display in the LCP or to be read via
serial communication. If to be displayed permanently
select Display Text 1 in
0-20 Display Line 1.1 Small ,
0-21 Display Line 1.2 Small , 0-22 Display Line 1.3 Small ,
0-23 Display Line 2 Large or 0-24 Display Line 3 Large .
Press [
▲
] or [
▼
] to change a character. Press [
◀
] and
[
▶
] to move the cursor. When a character is
highlighted by the cursor, it can be changed. Press
[
▲
] or [
▼
] to change a character. A character can be
inserted by placing the cursor between two
characters and pressing [
▲
] or [
▼
].
0-38 Display Text 2
Range: Function:
0
*
[0 -
0 ] In this parameter it is possible to write an individual
text string for display in the LCP or to be read via
serial communication. If to be displayed permanently
select Display Text 2 in
0-20 Display Line 1.1 Small ,
0-21 Display Line 1.2 Small , 0-22 Display Line 1.3 Small ,
0-23 Display Line 2 Large or 0-24 Display Line 3 Large .
Press [
▲
] or [
▼
] to change a character. Press [
◀
] and
[
▶
] to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between two characters and pressing [
▲
] or
[
▼
].
0-39 Display Text 3
Range: Function:
0
*
[0 -
0 ] In this parameter it is possible to write an individual
text string for display in the LCP or to be read via
serial communication. If to be displayed permanently
select Display Text 3 in
0-20 Display Line 1.1 Small ,
0-21 Display Line 1.2 Small , 0-22 Display Line 1.3 Small ,
0-23 Display Line 2 Large or 0-24 Display Line 3 Large .
Press [
▲
] or [
▼
] to change a character. Press [
◀
] and
[
▶
] to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between two characters and pressing [
▲
] or
[
▼
].
3.2.4 0-4* LCP Keypad
Enable, disable and password protect individual keys on
the LCP.
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1]
*
Enabled [Hand On] key enabled
[2] Password Avoid unauthorized start in Hand mode. If
0-40 [Hand on] Key on LCP is included in the My
Personal Menu, then define the password in
0-65 Personal Menu Password . Otherwise define
the password in 0-60 Main Menu Password .
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1]
*
Enabled [Off] key is enabled
[2] Password Avoid unauthorized stop. If 0-41 [Off] Key on LCP
is included in the My Personal Menu, then define
the password in
0-65 Personal Menu Password .
Otherwise define the password in 0-60 Main
Menu Password .
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1]
*
Enabled [Auto On] key is enabled
[2] Password Avoid unauthorized start in Auto mode. If
0-42 [Auto on] Key on LCP is included in the My
Personal Menu, then define the password in
0-65 Personal Menu Password . Otherwise define
the password in 0-60 Main Menu Password .
0-43 [Reset] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1]
*
Enabled [Reset] key is enabled
[2] Password Avoid unauthorized resetting. If 0-43 [Reset] Key
on LCP is included in the 0-25 My Personal Menu ,
then define the password in 0-65 Personal Menu
Password . Otherwise define the password in
0-60 Main Menu Password .
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
MG16H102 - VLT
®
is a registered Danfoss trademark 33
3 3