13-02 Stop Event
Option:
Function:
[14] Below feedb. low
See parameter group 5-3* for further
description.
[15] Above feedb. high
See parameter group 5-3* for further
description.
[16] Thermal warning
See parameter group 5-3* for further
description.
[17] Mains out of range See parameter group 5-3* for further
description.
[18] Reversing
See parameter group 5-3* for further
description.
[19] Warning
See parameter group 5-3* for further
description.
[20] Alarm (trip)
See parameter group 5-3* for further
description.
[21] Alarm (trip lock)
See parameter group 5-3* for further
description.
[22] Comparator 0
Use the result of comtor 0 in the logic
rule.
[23] Comparator 1
Use the result of comtor 1 in the logic
rule.
[24] Comparator 2
Use the result of comtor 2 in the logic
rule.
[25] Comparator 3
Use the result of comtor 3 in the logic
rule.
[26] Logic rule 0
Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1
Use the result of logic rule 1 in the
logic rule.
[28] Logic rule 2
Use the result of logic rule 2 in the
logic rule.
[29] Logic rule 3
Use the result of logic rule 3 in the
logic rule.
[30] SL Time-out 0
Use the result of timer 0 in the logic
rule.
[31] SL Time-out 1
Use the result of timer 1 in the logic
rule.
[32] SL Time-out 2
Use the result of timer 2 in the logic
rule.
[33] Digital input DI18
Use the value of DI18 in the logic rule
(High = TRUE).
[34] Digital input DI19
Use the value of DI19 in the logic rule
(High = TRUE).
[35] Digital input DI27
Use the value of DI27 in the logic rule
(High = TRUE).
[36] Digital input DI29
Use the value of DI29 in the logic rule
(High = TRUE).
13-02 Stop Event
Option:
Function:
[37] Digital input DI32
Use the value of DI32 in the logic rule
(High = TRUE).
[38] Digital input DI33
Use the value of DI33 in the logic rule
(High = TRUE).
[39] Start command
This event is TRUE if the frequency
converter is started by any means
(either via digital input, fieldbus or
other).
[40] Drive stopped
This event is TRUE if the frequency
converter is stopped or coasted by
any means (either via digital input,
fieldbus or other).
[41] Reset Trip
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and [Reset] is pressed.
[42] Auto Reset Trip
This event is TRUE if the frequency
converter is tripped (but not trip-
locked) and an Automatic Reset is
issued.
[43] OK Key
This event is TRUE if [OK] is pressed.
[44] Reset Key
This event is TRUE if [Reset] is pressed.
[45] Left Key
This event is TRUE if [
◄
] is pressed.
[46] Right Key
This event is TRUE if [
►
] is pressed.
[47] Up Key
This event is TRUE if [
▲
] is pressed.
[48] Down Key
This event is TRUE if [
▼
] is pressed.
[50] Comparator 4
Use the result of comtor 4 in the logic
rule.
[51] Comparator 5
Use the result of comtor 5 in the logic
rule.
[60] Logic rule 4
Use the result of logic rule 4 in the
logic rule.
[61] Logic rule 5
Use the result of logic rule 5 in the
logic rule.
[70] SL Time-out 3
Use the result of timer 3 in the logic
rule.
[71] SL Time-out 4
Use the result of timer 4 in the logic
rule.
[72] SL Time-out 5
Use the result of timer 5 in the logic
rule.
[73] SL Time-out 6
Use the result of timer 6 in the logic
rule.
[74] SL Time-out 7
Use the result of timer 7 in the logic
rule.
[80] No Flow
[81] Dry Pump
[82] End of Curve
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
86
MG16H102 - VLT
®
is a registered Danfoss trademark
3
3