Digital outputs
Programmable digital/pulse outputs
2
Terminal number
27, 29
1)
Voltage level at digital/frequency output
0–24 V
Maximum output current (sink or source)
40 mA
Maximum load at frequency output
1 k
Ω
Maximum capacitive load at frequency output
10 nF
Minimum output frequency at frequency output
4 Hz
Maximum output frequency at frequency output
32 kHz
Accuracy of frequency output
Maximum error: 0.1% of full scale
Resolution of frequency output
10 bit
1) Terminal 27 and 29 can also be programmed as input.
The digital output is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
Control card, 24 V DC output
Terminal number
12
Maximum load
100 mA
The 24 V DC supply is galvanically isolated from the supply voltage (PELV), but has the same potential as the analog and digital
inputs and outputs.
Relay outputs
Programmable relay outputs
2
Relay 01 and 02
01–03 (NC), 01–02 (NO), 04–06 (NC), 04–05 (NO)
Maximum terminal load (AC-1)
1)
on 01–02/04–05 (NO) (Resistive load)
250 V AC, 3 A
Maximum terminal load (AC-15)
1)
on 01–02/04–05 (NO) (Inductive load
@
cos
φ
0.4)
250 V AC, 0.2 A
Maximum terminal load (DC-1)
1)
on 01–02/04–05 (NO) (Resistive load)
30 V DC, 2 A
Maximum terminal load (DC-13)
1)
on 01–02/04–05 (NO) (Inductive load)
24 V DC, 0.1 A
Maximum terminal load (AC-1)
1)
on 01–03/04–06 (NC) (Resistive load)
250 V AC, 3 A
Maximum terminal load (AC-15)
1)
on 01–03/04–06 (NC) (Inductive load
@
cos
φ
0.4)
250 V AC, 0.2 A
Maximum terminal load (DC-1)
1)
on 01–03/04–06 (NC) (Resistive load)
30 V DC, 2 A
Minimum terminal load on 01–03 (NC), 01–02 (NO)
24 V DC 10 mA, 24 V AC 20 mA
1) IEC 60947 t 4 and 5
The relay contacts are galvanically isolated from the rest of the circuit by reinforced isolation.
Control card, +10 V DC output
Terminal number
50
Output voltage
10.5 V
±
0.5 V
Maximum load
15 mA
The 10 V DC supply is galvanically isolated from the supply voltage (PELV) and other high-voltage terminals.
Control characteristics
Resolution of output frequency at 0–500 Hz
±
0.003 Hz
System response time (terminals 18, 19, 27, 29, 32, and 33)
≤
2 ms
Speed control range (open loop)
1:100 of synchronous speed
Speed accuracy (open loop)
±
0.5% of nominal speed
Speed accuracy (closed loop)
±
0.1% of nominal speed
All control characteristics are based on a 4-pole asynchronous motor.
Specifications
VLT
®
AutomationDrive FC 360
58
Danfoss A/S © 03/2017 All rights reserved.
MG06A702
8
8
