Operating variable
Unit
Parameter 16-32 Brake Energy /s
kW
Parameter 16-33 Brake Energy Average
kW
Parameter 16-34 Heatsink Temp.
°
C
Parameter 16-35 Inverter Thermal
%
Parameter 16-36 Inv. Nom. Current
A
Parameter 16-37 Inv. Max. Current
A
Parameter 16-38 SL Controller State
Parameter 16-39 Control Card Temp.
°
C
Parameter 16-40 Logging Buffer Full
Parameter 16-50 External Reference
Parameter 16-51 Pulse Reference
Parameter 16-52 Feedback[Unit]
[Unit]
Parameter 16-53 Digi Pot Reference
Parameter 16-60 Digital Input
bin
Parameter 16-61 Terminal 53 Switch Setting
V
Parameter 16-62 Analog Input 53
Parameter 16-63 Terminal 54 Switch Setting
V
Parameter 16-64 Analog Input 54
Parameter 16-65 Analog Output 42 [mA]
[mA]
Parameter 16-66 Digital Output [bin]
[bin]
Parameter 16-67 Pulse Input #29 [Hz]
[Hz]
Parameter 16-68 Freq. Input #33 [Hz]
[Hz]
Parameter 16-69 Pulse Output #27 [Hz]
[Hz]
Parameter 16-70 Pulse Output #29 [Hz]
[Hz]
Parameter 16-71 Relay Output [bin]
Parameter 16-72 Counter A
Parameter 16-73 Counter B
Parameter 16-80 Fieldbus CTW 1
hex
Parameter 16-82 Fieldbus REF 1
hex
Parameter 16-84 Comm. Option STW
hex
Parameter 16-85 FC Port CTW 1
hex
Parameter 16-86 FC Port REF 1
hex
Parameter 16-90 Alarm Word
Parameter 16-92 Warning Word
Parameter 16-94 Ext. Status Word
Table 2.1 Units
Status view I
This readout state is standard after start-up or initialization.
Press [Info] to obtain information about the units linked to
the shown operating variables (1.1, 1.2, 1.3, 2 and 3).
See the operating variables shown in
1.1
2
3
1.3
1.2
130BP041.10
799 RPM
Auto Remote Ramping
1 (1)
36.4 kw
7.83 A
0.000
53.2 %
Status
Illustration 2.10 Status View I
Status view II
See the operating variables (1.1, 1.2, 1.3, and 2) shown in
In the example, speed, motor current, motor power, and
frequency are selected as variables in the 1st and 2nd
lines.
1.1
1.2
2
1.3
130BP062.10
207RPM
Auto Remote Running
1 (1)
24.4 kW
5.25A
6.9
Hz
Status
Illustration 2.11 Status View II
Status view III
This state shows the event and action of the smart logic
control. For further information, see
chapter 3.13 Parameters: 13-** Smart Logic Control
.
130BP063.10
778 RPM
Auto Remote Running
1 (1)
4.0 kW
0.86 A
State: 0 off 0 (off)
When: -
Do: -
Status
Illustration 2.12 Status View III
How to Program
VLT
®
AutomationDrive FC 301/302
16
Danfoss A/S © 10/2018 All rights reserved.
MG33MP02
2
2
Summary of Contents for VLT AutomationDrive FC 302
Page 2: ......