The E1 enclosure is always delivered with a
pedestal as standard. Install the pedestal on
the floor. Fixing holes are to be drilled accord-
ing to this figure:
Illustration 3.23: Drill master for fixing holes in
floor.
Mount the drive on the pedestal and fix it with
the included bolts to the pedestal as shown on
the illustration.
Illustration 3.24: Mounting of drive to pedestal
3. How to Install
VLT
®
Automation Drive FC 300
Operating Instructions High Power
32
MG.33.U1.02 - VLT
®
is a registered Danfoss trademark
3