23-02 OFF Time
Array [10]
Range:
Function:
Application
dependent*
[Application dependant]
Sets the OFF time for the timed action.
NOTE!
The adjustable frequency drive has no backup of the clock function and the set
date/time will reset to default (2000-01-01 00:00) after a power-down unless a
real time clock module with backup is installed. In par. 0-79
Clock Fault
, it is
possible to program for a warning in case the clock has not been set properly,
e.g., after a power-down.
23-03 OFF Action
Array [10]
Option:
Function:
Select the action during OFF Time. See par. 13-52
SL Controller Action
for descriptions of the op-
tions.
[0] *
DISABLED
[1] *
No action
[2]
Select set-up 1
[3]
Select set-up 2
[4]
Select set-up 3
[5]
Select set-up 4
[10]
Select preset ref 0
[11]
Select preset ref 1
[12]
Select preset ref 2
[13]
Select preset ref 3
[14]
Select preset ref 4
[15]
Select preset ref 5
[16]
Select preset ref 6
[17]
Select preset ref 7
[18]
Select ramp 1
[19]
Select ramp 2
[22]
Run
[23]
Run reverse
[24]
Stop
[26]
Dcstop
[27]
Coast
[32]
Set digital out A low
[33]
Set digital out B low
[34]
Set digital out C low
[35]
Set digital out D low
[36]
Set digital out E low
[37]
Set digital out F low
[38]
Set digital out A high
VLT AQUA Low Harmonic Drive Instruction
Manual
6 How to Program the Low Harmonic Drive
MG.20.T1.22 - VLT
®
is a registered Danfoss trademark
6-45
6