40
VLT
®
3500 HVAC
MG.35.B1.02 – VLT is a registered Danfoss trademark
★
= factory setting. Text in ( ) = display text. Figures in [ ] are used when communicating with the bus.
Description of choice:
The pre-programme
[0] contains the data set at the
factory. Can be used as data source if the other set-
ups are to be returned to a known state. The lan-
guage used is English.
■
Operation and display, group 0..
This group comprises parameters that concern dis-
play read-outs, local operation and the handling of
set-ups.
It is not possible to change data when this set-up has
been chosen, but via parameter 002 it is possible to
copy to one or several set-ups.
Set-ups 1-4
[1]-[4] are four individual set-ups for use
as desired. Changes can be made to the currently
active set-up; such changes have an immediate
effect on the functioning of the unit. However, certain
parameters require a Stop Mode before being
changed.
Multi set-up
[5] is used if remote control of more than
one set-up is required. Terminal 16/17 (par. 400/401),
terminal 32/33 (par. 406) or the serial bus can be used
for switching between set-ups.
002 Copy of set-ups
(
(MENU SET COPY)
Value:
★
No copying (DO NOT COPY)
[0]
Copy to 1 from # (COPY TO 1 FROM)
[1]
Copy to 2 from # (COPY TO 2 FROM)
[2]
Copy to 3 from # (COPY TO 3 FROM)
[3]
Copy to 4 from # (COPY TO 4 FROM)
[4]
Copy to ALL from # (COPY ALL FROM)
[5]
Function:
A menu set-up can be copied to one of the other set-
ups or to all the other set-ups simultaneously,
although not to set-up [0].
Copying is only enabled in Stop Mode.
Description of choice:
The copying starts when you have entered the de-
sired copying function and Data Mode is left by pres-
sing the "Menu" key, or left automatically after 20 sec-
onds.
Line 3 in the display flashes while copying is in pro-
gress. The display indicates the destination set-up
and the source set-up. It is always the active set-up
that is being copied from (chosen in parameter 001),
or the set-up chosen via terminals 16/17 or 32/33).
When copying has been completed, the data value
shifts automatically to
No copying
[0].
3.4 Parameter gr
oup 0
Programming
■
000 Language (LANGUAGE)
Value:
★
English (ENGLISH)
[0]
German (DEUTSCH)
[1]
French (FRANCAIS)
[2]
Danish (DANSK)
[3]
Spanish (ESPANOL)
[4]
Italian (ITALIANO)
[5]
Function:
The choice in this parameter defines the language of
the display.
Description of choice:
There is a choice of
English, German, French, Danish,
Spanish
and
Italian.
001 Set-up choice, operation (SETUP OPERATIO)
Value:
Pre-programmed (FACTORY SET)
[0]
★
Setup 1 (SETUP 1)
[1]
Setup 2 (SETUP 2)
[2]
Setup 3 (SETUP 3)
[3]
Setup 4 (SETUP 4)
[4]
Multisetup (MULTI SETUP)
[5]
Example:
Setup
Terminal 17
Terminal 16
1
0
0
2
0
1
3
1
0
4
1
1
Function:
The choice in this parameter defines the set-up num-
ber you want to control VLT 3500 HVAC. The para-
meters that can be changed are stated on page 85-
86. If more set-ups are required, up to four different
ones can be selected. If you want to remote-control
the choice between the different set-ups, this can be
done from terminals 16/17 or 32/33, as well as via the
serial port (RS 485).