43
VLT
®
3500 HVAC
MG.35.B1.02 – VLT is a registered Danfoss trademark
Section 1Section 1Section 1Section 1Section 1
Section 2Section 2Section 2Section 2Section 2
Section 3Section 3Section 3Section 3Section 3
Section 4Section 4Section 4Section 4Section 4
015 Set-up choice, Programming
(SETUP PROGRAM.)
Value:
Pre-programmed (FACTORY SET)
[0]
Setup 1 (SETUP 1)
[1]
Setup 2 (SETUP 2)
[2]
Setup 3 (SETUP 3)
[3]
Setup 4
(SETUP 4)
[4]
★
Set-up=Parameter 001 (SETUP=P001)
[5]
Function
It is possible to choose the menu set-up that is to be
programmed (whose data are to be changed) during
operation.
The 4 menu set-ups can be programmed indepen-
dently of the set-up in which VLT 3500 HVAC is
running (selected in parameter 001). This concerns
programming via the keyboard and the serial bus
(RS 485).
Description of choice:
Pre-programmed
[0] contains the factory-set data
and can be used as a source for data. The language
is always English. It is not possible to change data
with this set-up selected.
Set-ups 1-4
[1]-[4] are 4 individual set-ups which can
be used as desired. They can be programmed
independently of the set-up currently used.
Setup = Parameter 001
[5] is the pre-selected value
normally used. This function can be removed if ac-
cess to programming other set-ups than the one
applied is required during operation.
NB!:
NB!:
NB!:
NB!:
NB!:
If data is changed in the set-up being used,
these changes have immediate effect on the
functioning of the unit. This applies to both
parameters 001 and 015.
★
= factory setting. Text in ( ) = display text. Figures in [ ] are used when communicating with the bus.
3.4 Parameter gr
oup 0
