m Version 3.11
Manual RS.8A.N5.0 © Danfoss 10-007
31
EKC measurements and setup
Concept
The m display can display data from individual
controllers. Data is uploaded to m via data com-
munication.
The following can be displayed, depending on the
type of controller and what is being regulated:
The poin
t number will c
orr
espond t
o a c
on
troller addr
ess
Supplementary text that can
be added to the point number
Indicates the upper alarm limit setting. When
the
of the symbol is scrolling, it indicates
that the upper alarm limit has been exceeded.
A wave
Indicates the set point for the EKC controller
Indicates the lower alarm limit setting. When
the
part of the symbol is scrolling, it
indicates that the lower alarm limit has been
exceeded.
Primary meas-
urement from
the controller.
This shows the
air temperature.
For a pack con-
trol it could be:
P0 bar
- Remote - alarms are based on controller settings.
Alarm limits will be determined by the external controller.
Some alarm limits are set as absolute values, others as a
difference to the set point. See controller data.
Regulation status is shown
by means of icons, e.g.:
- cooling
- defrost
- fans on
- compressors on
Secondary measure-
ment from the
controller.
This shows the de-
frost temperature.
For a pack control it
could be:
Pc bar
