Figure 24. Cable harness connection with the cable lug and the cable gland (for illustration only)
It is essential to select a cable gland with a thread M25 x 1.5 otherwise the cable gland cannot be installed. Make sure that
the cable lug can enter through the M25 threaded hole, Ø 23 mm!
The information below describes how to assemble screened power cables to the electric device.
P itsch BlueGlobe-series cable glands and H+S Radox Elastomer S automotive cables are
recommended. Cable gland assembly instruction can also be found from P itsch gland catalogue
available from
Correct cable gland type for the cross section cables is P itsch blueglobe TRI bg 225ms tri.
Cable lug and cable gland assembly steps
1. Remove the small hexagonal piece from the BlueGlobe-sealing insert as shown in Figure below.
Figure 25. BlueGlobe-sealing
EC-C1200-450
5. Installation
| BC265735231757en-000109
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019 | 43
Summary of Contents for EC-C1200-450
Page 1: ...User Guide Electrical converter EC C1200 450 danfoss com...
Page 69: ......