Table 16. Tools and accessories
Description
Part
number
Supplier example
Crimping Tool Assembly 58529-1 with Die
Assembly 58529-2
58529-1
http:// .mouser.com/ProductDetail/TE-Connectivity/58529-1/?
qs=Xf%252b3Aw93yEM%2FQReWIgzu%252bw%3D%3D
Connector seal plug (for storage and
transportation)
770678-
1
http://www.te.com/usa-en/product-770678-1.html
35-position wire relief
776463-
1
http://www.te.com/usa-en/product-776463-1.html
Detailed and up to date information can be found at manufacturer's web-pages. Connector
assembly according to connector manufacturer instructions (for example contact crimping).
Minimum wiring and connections needed for powering the electric device are shown below
(marked with red). If any of these signals is not connected, the electric device will not be switched
on or it will be in the tripped state and will not work.
Figure 33. Low voltage signals: minimum connections needed for powering the electric device
EC-C1200-450
5. Installation
52 |
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019
| BC265735231757en-000109
Summary of Contents for EC-C1200-450
Page 1: ...User Guide Electrical converter EC C1200 450 danfoss com...
Page 69: ......