Triple Pro Input Stereo Module
AirMax from D&R - Phone: +31 294 418014 - E-Mail:
- 12 -
6 TRIPLE PRO Input Stereo Module
PHANTOM
The PHANTOM button toggles 48V phantom power on and off on the MIC input of this
module.
LC
The LC switch toggles the filter on the MIC input on and off. The filter has a 12 dB per
octave low-cut filter at 80 Hz.
MIC INSERT
The MIC INSERT switch positions a balanced INSERT in or out of the microphone’s signal
path.
TRIM
The TRIM control adds an extra 30dB of gain to the MIC pre-amp. An optimal gain range
can be found in this way.
GAIN
The GAIN control adjusts the incoming signal level on the MIC and LINE input.
INPUT
The INPUT switch allows the user to switch input between MIC, LINE A and LINE B.
The associated LEDS indicate which input is currently selected.
MONO
The MONO switch is used to make an incoming signal mono or accept one and route it to
both outputs of the module. The associated LEDS indicate if mono is currently active and
if either left and right inputs are summed or only the left input signal is routed or only the
right.
HF
Adjusts high frequencies with +/- 12 or 6 dB at 12 kHz shelving.
HMF
Adjusts high-mid frequencies with +/- 12 or 6 dB at 5 kHz bell curve.
LMF
Adjusts low-mid frequencies with +/- 12 or 6 dB at 250 Hz bell curve.
LF
Adjusts the low frequencies with +/- 12 or 6 dB at 60 Hz shelving.
EQ
The EQ switch toggles equalization on and off.
GROUPS
These leds indicate if and to which stereo GROUP this module is currently assigned.
PROG
The PROG switch assigns the signal in stereo to the PROG output.
SUB
The SUB switch assigns the signal in stereo to the SUB output,
where the SUB control
adjusts the amount of signal send to the SUB output just like an AUX send.
