Hybrid Module
AirMax from D&R - Phone: +31 294 418014 - E-Mail:
- 15 -
7 HYBRID
Module
TRIM
The TRIM control adjusts the optimum side-tone suppression (RC-balance) and only
needs to be adjusted once with installation.
SEND
The SEND control adjusts the outgoing signal to the Caller.
GAIN
The GAIN control adjusts the incoming signal level on the HYBRID and LINE input.
INPUT
The INPUT switch allows the user to switch input between the internal hybrid and an
external line in. The associated led indicates which input is currently selected.
INSERT
The INSERT switch inserts an external device into the signal path.
HC
The HC control adjusts the 12 dB per octave high cut filter in a range from 1 kHz to off.
LC
The LC control adjusts the12 dB per octave low cut filter in a range from off to 500 Hz.
FILTER
The FILTER led indicates whether the HC/LC filters are on or off.
GROUPS
These leds indicate if and to which stereo GROUP this module is assigned.
PROG
The PROG switch assigns the signal in stereo to the PROG output.
SUB
The SUB switch assigns the signal in stereo to the SUB output.
AUX1
The AUX1 control adjusts the amount of signal send to the stereo AUX 1 bus.
AUX2
The AUX2 control adjusts the amount of signal send to the stereo AUX 2 bus.
PAN
Allows adjustment between the left and right channel outputs.
COMM
The COMM switch enables communication between this channel and anyone who has
access to the COMM bus at the same time.
VCA
These leds indicate if and which VCA master controls this module.
The VCA led gives an indication of the VCA control voltage.
