Triple Input Stereo Module
AirMax from D&R - Phone: +31 294 418014 - E-Mail:
- 9 -
5 TRIPLE Input Stereo Module
PHANTOM
The PHANTOM button toggles 48V phantom power on and off on the MIC input of this
module.
LC
The LC switch toggles the filter on the MIC input on and off. This is a 12 dB per octave
low-cut filter at 80 Hz.
MIC INSERT
The MIC INSERT switch positions a balanced insert in or out of the microphone’s signal
path.
TRIM
The trim control adds an extra 30dB of gain to the MIC pre-amp. An optimal gain range is
set in this way.
GAIN
The GAIN control adjusts the incoming signal level on the MIC and LINE input.
INPUT
The INPUT switch allows the user to switch between MIC, LINE A and LINE B.
The associated LEDS indicate which input is currently selected.
MONO
The MONO switch can convert an incoming signal into a mono signal or accept one and
route it to both outputs of the module. The associated LEDS indicate if mono is currently
active and if either left and right inputs are summed, only the left or only the right input
signal is routed.
HF
Adjusts high frequencies with +/- 12 or 6 dB at 10 kHz shelving.
MF
Adjusts high-mid frequencies with +/- 12 or 6 dB at 1 kHz bell curve.
LF
Adjusts the low frequencies with +/- 12 or 6 dB at 60 Hz shelving.
EQ
The EQ led indicates whether equalization is on or off.
GROUPS
These leds indicate if and to which stereo GROUP this module is assigned.
PROG
The PROG switch assigns the signal in stereo to the PROG output.
SUB
The SUB switch assigns the signal in stereo to the SUB output.
AUX1
The AUX1 control adjusts the amount of signal sent to the stereo AUX 1 bus.
AUX2
The AUX2 control adjusts the amount of signal sent to the stereo AUX 2 bus.
