15
25. Screw 2100 x 2980 mm polycarbonate roof covering to greenhouse profile in appropriate
places, starting at the bottom (foundation part) and going upwards. Use screws M5-40 (28),
nuts (29) and spacers (31). Sheets that meet at the middle of greenhouse must go on top of
each other (~5-10), only after placing them in such manner tighten the screws M5-40 (28),
nuts (29) and spacers (31). At the back end and front end, polycarbonate sheets must be
overhanging equally with foundation edge (25 pic).
25 piс.
26. Cut out polycarbonate parts from top reinforcement rails of arcs (NO. 5) to the top (width
= distance between posts) at the places chosen for skylight (26 pic).
26 piс.
27. All parts listed in skylight set (SKYLIGHT NO.1; SKYLIGHT NO.2; SKYLIGHT NO.3)
must be connected in such way that they would form a rectangle; use screws M5-40 (28), nuts
(29). Skylight hinges must by tightened to skylight profile (NO.13) with screws M5-12 (26)
and nuts (29) (27.1 pic).
27.1 piс.
SKYLIGHT NO.1
SKYLIGHT NO.3
SKYLIGHT NO.2
Polycarbonate
fixing points
