4
Scheme for cutting polycarbonate
Use appropriate side of polycarbonate! Side with protective layer, which protects
from UV radiation, must be on the outside. Protective layer is covered with plate
which contains writings; other side (which has to be on the inside) is covered with
clear tape. If sheets need to be cut, we recommend using electric saw, handsaw with
fine teeth or sharp knife. Tape must be removed prior to installation! ALWAYS
WEAR GLOVES WHEN CUTTING!
-1-; -4-; Side end part
-2-; -3-; Side-front parts
-5-
Door (bottom part)
-6-
Door (top part)
-7- Skylight
-8-
Part above the door
NOTE:
additionally installed skylight
sheet:
1pc for 4 m long greenhouse
2pcs – 6m
3pcs – 8m nd etc.
Diagram for cutting one polycarbonate 2100x6000 mm sheet for standard greenhouse (dou-
ble door at the front end, wall at the back end):
