Dan Dugan Sound Design E-1 User Manual Download Page 48

Page: 48 / 52

Dugan Models E-1 and E-1A User Guide

Figure 6-1

Dugan Utility

If you do not see the Dugan unit(s) on your network in the list, see

Establishing

Network Connections on

page 17.

Select the unit to update from the list.

Make sure

Use DHCP

NOT

selected for that unit.

Under certain network conditions, DHCP is not compatible with the firmware up-
date process.

Click on

Send New Params To Unit

Click

Update Firmware

The unit reboots after the update completes.

Repeat steps 5 through 8 for each unit you wish to update.

NOTE:

To force an update when the

Update Firmware

button is not blue, Ctrl-click the button.

NOTE:

If the firmware update process fails, your unit may not pass audio. To recover from this
condition, repeat steps 5 through 8 above, but Ctrl-click the

Update Firmware

button.

Summary of Contents for E-1





















































Search results

Summary of Contents for E-1

Reviews:

Related manuals for E-1

Brands by name

Popular brands

Dan Dugan Sound Design E-1, User Manual

Search results

Summary of Contents for E-1

Reviews:

Related manuals for E-1

Brands by name

Popular brands