Dan Dugan Sound Design E-1 User Manual Download Page 3 | Manualshive

Page: 3 / 52

background image

Warranty Statement

Warranty: One year parts and labor

Dan Dugan Sound Design warrants that Model E-1A hardware will be free from de-
fects in components and workmanship for a period of 12 months from the date of in-
voice. During the warranty period, Dan Dugan Sound Design will cover the cost of all
parts and labor to remedy the defect, or replace products which prove to be defective.
Dan Dugan Sound Design is not obliged to honor this warranty if the hardware has
failed to be maintained and operated as specified by Dan Dugan Sound Design, in the
accompanying documentation, or other than in accordance with industry standards.
Defects caused by unauthorized modifications, misuse, negligence, act of God or ac-
cident are not covered by this warranty. Software is provided as a convenience, but
due to the wide variety of computer systems, cannot be guaranteed to work. This
Limited Warranty is exclusive and no other warranty is expressed or implied. Dan Du-
gan Sound Design does not warrant that Dan Dugan Sound Design software, or any
third-party software, is error free. Third party branded or manufactured goods are
supplied by Dan Dugan Sound Design with care but without responsibility and
subject only to third party suppliers’ warranties. In all other respects Dan Dugan
Sound Design is not liable for consequential damages.

«
1
2
3
4
5
...
»

Summary of Contents for E-1





















































Reviews:

No comments

Related manuals for E-1

Brand: Veeder-Root Pages: 41

TLS4/8601 Series

Brand: Veeder-Root Pages: 24

Brand: Veeder-Root Pages: 328

Brand: Veeder-Root Pages: 87

Brand: Veeder-Root Pages: 69

Brand: Boss Pages: 72

Brand: Laney Pages: 6

REVIVALDRIVE HOT ROD EDITION

Brand: Origin Effects Pages: 20

Brand: Rowlett Pages: 12

Brand: Hamilton Beach Commercial Pages: 40

BLACK LABEL SERIES

Brand: EBS Pages: 2

Brand: Fender Pages: 8

Brand: Behringer Pages: 15

Brand: Fulltone Pages: 2

Brand: Siemens Pages: 108

Brand: Russell Hobbs Pages: 8

Brand: Sony Pages: 8

Brand: Sony Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands