Dugan Models E-1 and E-1A User Guide
Dugan Control Panel
31
Setting Controls and Naming Units/Channels
Setting Controls
Controls can be adjusted five ways:
•
Enter a dB value in the numeric field.
•
Drag in the numeric field (not on iPad).
When a slider is present:
•
Drag the slider up or down.
•
Click in the slider track to raise or lower the value by 0.5 dB.
•
Ctrl-click anywhere on the slider to reset its value to 0 (touch and hold on iPad).
Naming Units and Channels
Connected units are displayed in the top pane in alphabetical order. To display them
in your own order, use names with number prefixes.
To name a unit and its channels:
1.
Select a unit in the top pane.
2.
Select the yellow text in the right pane (under the Dugan logo) and type a name.
3.
Press the Enter key on the keyboard to set the name.
4.
To name a channel, select the yellow text and type a name.
5.
Press the Enter key on the keyboard to set the name.
Channel naming is cleared by pressing
reset
(see page 40).
When the unit is powered up, channel modes are determined by their preset modes;
all other settings are retained.
After configuring settings with the Dugan Control Panel, it can be disconnected. All
settings are retained and the unit continues to function on its own.
Summary of Contents for E-1
