damian LXS9 Series, Installation And Service

Page: 32 / 46

Serie "LXS9"
Pagina A - 10
Rev. M - 01
EXECUTIVE PAYMENT SYSTEM PARAMETERS
(Visible and programmable only with „ Operating mode = Executive‟)
>
V
ALUE OF EACH STEP OR
C
OIN SCALING FACTOR
:
The value of the coins and the selling prices are always expressed as multiples of a base coin of minimum
value. During operation with Executive payment systems, this value must be the same as the one set in
the payment system. Settable values:
0 ÷ 1000 .
[ Default: 00001 ]
Note 1 : if, during entering of the selling prices and of the values of the various coins and banknotes, they
are not multiples of the “Value of each step” parameter, they will automatically be rounded off.
MDB PAYMENT SYSTEM PARAMETERS
(Visible and programmable only with „ Operating mode = MDB ‟ )
Some of these menus are only visible if a peripheral device is connected that foresees their use.
>
M
AXIMUM CREDIT
:
To set the maximum credit value accepted by the MDB payment system. When the credit in the vending
machine reaches this value, the machine no longer accepts coins or banknotes.
Settable values:
0 ÷ 65535 (independent of the position of the comma, e.g. with 2 decimals the maximum
credit is 655.35). If set to 0, this control is disabled.
[ Default: 0 ]
>
C
OIN RETURN PARAMETERS
:
If there is an MDB coin return payment system installed in the vending machine, selecting this function it
will be possible to set the following operating parameters for it:
»
C
OIN MINIMUM TO INDICATE NO CHANGE AVAILABLE
(Visible and programmable only if „MDB coin return‟ payment system installed)
To set the minimum value of the coins that must be present in each individual tube of the MDB coin box
below which the vending machine indicates no change available.
Settable values:
0 ÷ 15 .
[ Default: 5]
»
C
OIN MINIMUM IN TUBES TO GIVE CHANGE
:
(Vis ible and programmable only if „MDB coin return‟ payment system installed)
To set the minimum value of the coins that must be present in the tubes in an MDB payment system
below which the vending machine does not give change.
Settable values:
0 ÷ 5 .
[ Default: 2 ]
Programming
Price management
Min. coin value
Current value
F
Programming
MDB parameter
Maximum credit
Current value
F
Programming
MDB parameter
Coin retn.param.
->->->
MinTube NoChange
Current value
F
F
Programming
MDB parameter
Coin retn.Param.
->->->
Min. coins tubes
Current value
F
F