Dalsa Piranha3, User Manual

Page: 82 / 91

Piranha 3 User Manual
03-032-10216-02 DALSA
82
Command Syntax Parameters Description
set fpn coeff
sfc x i
Set the FPN coefficient.
x
=pixel number within the range
1
to
sensor pixel count
.
i
= FPN value within the range
0
to
2048
.
Refer to Setting a Pixel’s FPN Coefficient
on page 44 for details.
set fpn range
sfr x x i
Set a range of pixel FPN coefficients
x
=first pixel number of the range.
x
=last pixel number of the range
i
=coefficient value in a range from
O
to
2048
.
Refer to Setting a Range of FPN
Coefficients on page 49 for details.
set lower threshold
slt
i Sets the lower threshold that is checked
for and reported in the end-of-line
sequence in a value from
0
-
4095
. Refer
to section 3.4.3 End-of-line Sequence for
details.
set output throughput
sot m
This command works in conjunction
with the
clm
command and determines
the pixel rate of the camera.
320 =
4 taps at 80MHz or 8 taps at
40MHz
This command is currently not
configurable in the Piranha3 camera.
set prnu coeff
spc x i
Set the PRNU coefficient.
x
=pixel number within the range
1
to
sensor pixel count
.
i
= PRNU value within the range
0
to
28671
.
Refer to on page 46 for details.
set prnu range
spr i i x
Set a range of pixel PRNU coefficients
i
=first pixel number of the range
i
=last pixel number of the range
x
=coefficient value in a range from
0
to
28671
.
Refer to Setting a Range of PRNU
Coefficients on page 47 for details.
set pretrigger
spt i
Set the pretrigger to a value from
0
to
16
.
set subtract background
ssb t i
Subtract the input value from the output
signal.
t
= Tap value.
0
for all taps or
1
to
8
for
individual tap selection.
i
= Subtracted value in a range from
0
to
4095
.
Refer to on page 44 for details.