Dalsa Piranha3, User Manual

Page: 81 / 91

Piranha 3 User Manual
DALSA 03-032-10216-02
81
Command Syntax Parameters Description
set analog gain
sag t f
Sets the analog offset.
t
= Tap value.
0
for all taps or
1
-
8
for
individual tap selection.
f
= gain value specified from
–10
to
+10
Refer to Analog Signal Processing:
Setting Analog Gain and Offset on page
38 for details.
set analog offset
sao t i
Sets the analog offset.
t
= Tap value.
0
for all taps or
1
-
8
for
individual tap selection.
i
= Offset value in a range from 0 to 255.
Offset increases with higher values.
Refer to Analog Signal Processing:
Setting Analog Gain and Offset on page
38 for details.
set baud rate
sbr i
Set the speed of camera serial
communication port. Baud rates:
9600
,
19200
,
57600
, and
115200
. Default:
9600. Refer to section Setting Baud Rate
on page 24 for details.
set digital offset
sdo t i
Subtracts the input value from the video
signal prior to FPN correction.
t
= Tap value.
0
for all taps or
1
to
8
for
individual tap selection.
i
= Offset in a range from
0
to
2048
DN.
Refer to
Setting Digital Offset on page45 for
details.
set exposure mode
sem
m Set the exposure mode:
2 =
Internal SYNC, internal PRIN,
programmable line rate and exposure
time using commands
ssf
and
set
3 =
External SYNC, internal PRIN,
maximum exposure time
4
= Smart EXSYNC
5
= External SYNC and PRIN
6
= External SYNC, internal PRIN,
programmable exposure time
7 =
Internal programmable SYNC,
maximum exposure time. Factory
setting.
8
= Internal SYNC, internal PRIN,
programmable exposure time. Maximum
line rate for exposure time.
set exposure time
set f
Sets the exposure time. Refer to the
camera help screen (
h
command) for
allowable range.