Dalsa Piranha3, User Manual

Page: 52 / 91

Piranha 3 User Manual
03-032-10216-02 DALSA
52
3.5 Saving and Restoring Settings
Figure 17: Saving and Restoring Overview
Factory
Settings
User
Settings
Current
Session
wus wpc,wfc ,
rus lpc ,
rfs,
lpc 0
Factory Settings
On first initialization, the camera operates using the factory settings. You can restore the
original factory settings at any time using the command
rfs
.
User Settings
You can save or restore your user settings to non-volatile memory using the following
commands. Pixel coefficients are stored separately from other data.
• To save all current user settings to EEPROM, use the command
wus
. The camera will
automatically restore the saved user settings when powered up.
Note:
While settings
are being written to nonvolatile memory, do not power down camera or camera
memory may be corrupted.
• To restore the last saved user settings, use the command
rus
.
• To save the current pixel coefficients, use the command
wpc i
and
wfc i
.
• To restore saved pixel coefficients, use the command
lpc i
.
Current Session Settings
These are the current operating settings of your camera. To save these settings to non-
volatile memory, use the command
wus
.