62
Appendix A: GenICam Commands
Output
Circuit
0
1
2
3
0
1
2
3
4095
4094
4093
4092
4095
4094
4093
4092
Sensor Circuit
Simplified Linea LUT Block Diagram
Programmed as a Invert
Function
Pixel
Data
Figure 24: Simplified 12-bit LUT Block Diagram
LUT data can be created using the LUT feature in CamExpert or using an Excel spreadsheet
provided by Teledyne Dalsa. To upload a LUT file, use
File Access Control Category >
Upload/Download File > Settings
and select Look Up Table.
Image Format Control Category
The Image Format controls, as shown by CamExpert, group parameters used to configure
camera pixel format, image cropping, and the test pattern.
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as
Invisible
are usually for Teledyne
DALSA or third party software usage—not typically needed by end user applications.
