58
Appendix A: GenICam Commands
Digital I/O Control Feature Descriptions
The Digital I/O controls, as shown by CamExpert, groups sensor specific parameters. This
group includes controls for line rate, exposure time, scan direction, and gain. Parameters in
gray are read only, either always or due to another parameter being disabled. Parameters in
black are user set in CamExpert or programmable via an imaging application.
Digital I/O Control Feature Descriptions
The following table describes these parameters along with their view attribute and minimum
camera firmware version required. Additionally the firmware column will indicate which
parameter is a member of the DALSA Features Naming Convention (DFNC), versus the
GenICam Standard Features Naming Convention (SFNC not shown).
The Device Version number represents the camera software functional group, not a
firmware revision number.
Display Name
Feature
Description
Device Version
& View
Trigger Source
Trigger Source
Defines the source of external trigger (RO)
1.00
DFNC
Beginner
Trigger Selector
Trigger Selector
Defines what the trigger initiates (RO)
1.00
DFNC
Beginner
Trigger Mode
Trigger Mode
Determines the source of trigger to the camera,
internal or external (CC1)
1.00
DFNC
Beginner
