Dalsa Genie Nano-5G Series, User Manual, Page: 50 / 204

48 • Contents Nano-5G Series GigE Vision Camera
Power-up Configuration
Selector
UserSetDefaultSelector Selects the camera configuration set to load
and make active on camera power-up or
reset. The camera configuration sets are
stored in camera non-volatile memory. (RW)
1.00
Beginner
Factory Setting Default Load factory default feature settings.
UserSet1 UserSet1 Select the user defined configuration UserSet
1 as the Power-up Configuration.
UserSet2 UserSet2 Select the user defined configuration UserSet
2 as the Power-up Configuration.
User Set Selector UserSetSelector Selects the camera configuration set to load
feature settings from or save current feature
settings to. The Factory set contains default
camera feature settings. (RW)
1.00
Beginner
Factory Setting Default Select the default camera feature settings
saved by the factory.
UserSet 1 UserSet1 Select the User Defined Configuration space
UserSet1 to save to or load from features
settings previously saved by the user.
UserSet 2 UserSet2 Select the User Defined Configuration space
UserSet1 to save to or load from features
settings previously saved by the user.
Load Configuration UserSetLoad Loads the camera configuration set specified
by the User Set Selector feature, to the
camera and makes it active. Can not be
updated during a Sapera transfer. (W)
1.00
Beginner
Save Configuration UserSetSave Saves the current camera configuration to the
user set specified by the User Set Selector
feature. The user sets are located on the
camera in non-volatile memory. (W)
1.00
Beginner
Power-up Configuration
Selector
UserSetDefault Specify the camera configuration set to load
and make active on camera power-up or
reset. The camera configuration sets are
stored in camera non-volatile memory.
1.00
Beginner
Serial Number DeviceID Displays the device’s factory set camera serial
number.
1.00
Invisible
Factory Setting Default Select the Factory Setting values as the
Power-up Configuration. 1.00
Invisible
UserSet1 UserSet1 Select the user defined configuration UserSet
1 as the Power-up Configuration.
UserSet2 UserSet2 Select the user defined configuration UserSet
2 as the Power-up Configuration.
Calibration Date deviceCalibrationDateRaw Date when the camera was calibrated.
Device Acquisition Type deviceAcquisitionType Displays the Device Acquisition Type of the
product. 1.00
DFNC
Invisible
Sensor Sensor The device gets its data directly from a
sensor.
Device TL Type DeviceTLType Transport Layer type of the device. 1.00
DFNC
Invisible GigE Vision GigEVision GigE Vision Transport Layer
Device TL Version Major DeviceTLVersionMajor Major version of the device’s Transport Layer. 1.00
Invisible
Device TL Version Minor DeviceTLVersionMinor Minor version of the device’s Transport Layer.