Dalsa Genie Nano-5G Series, User Manual, Page: 115 / 204

Nano-5G Series GigE Vision Camera Operational Reference • 113
Metadata Control Category
The Genie Nano-5G Metadata controls as shown by CamExpert, has features to enable and select
inclusion of chunk data with the image payload (as specified by the specification GigE Vision 1.2).
Parameters in gray are read only, either always or due to another parameter being disabled.
Parameters in black are user set in CamExpert or programmable via an imaging application.
Features listed in the description table but tagged as
Invisible are usually for Teledyne DALSA or
third party software usage — not typically needed by end user applications. Also important, Genie
Nano-5G cameras are available in a number of models implementing different sensors and image
resolutions which may not support the full feature set defined in this category.
Metadata Control Category Feature Descriptions
Teledyne DALSA provides header files for developers managing Genie Nano-5G LUT data and chunk
payload data as supported by GigE Vision 1.2. Refer to section following the table of metadata
features.
Display Name Feature & Values Description Device Version
& View
Metadata Mode ChunkModeActive Activates the inclusion of chunk data (metadata) in the payload
of the image.
1.00
Expert
False No chunk data.
True Chunk data included in payload
Chunk
Compatibility
Mode
chunkCompatibilityMode Selects the format of the chunk data (metadata) in the payload
of the image.
1.00
Beginner
DFNC
Gen API GenAPI Metadata compatible with GenICam GenAPI.