Dalsa Genie Nano-5G Series, User Manual

Page: 24 / 204

22 • Contents Nano-5G Series GigE Vision Camera
Specifications: M2450
Supported Features M2450
Resolution 2464 x 2056
Sensor Sony IMX250 (5.1M)
Pixel Size 3.45 µm x 3.45 µm
Shutter type Full frame electronic global shutter function
Firmware option
(Field programmable) Standard Design
(Mono)
Full Well charge; dependent on Firmware
Design Loaded
10.7ke (max)
Sensitivity to Saturation 1x
Max. Internal Frame Rate
Full resolution
141 fps
Maximum Sustained Frame Rate Output ( with
TurboDrive v2 ) *
141 fps (8-bit)
Maximum Sustained Frame Rate Output
(
without TurboDrive )
117 fps (8-bit)
Pixel Data Formats Mono 8-bit
Trigger to Exposure Minimum delay
2 Line Time ( Synchronous Exposure Alignment )
0 µs ( Reset Exposure Alignment )
Trigger to Exposure Start jitter
0 µs to 1 Line Time ( Synchronous Exposure Alignment )
0 µs (Reset Exposure Alignment)
Actual Exposure Time Minimum
(see “exposureTimeActual” in Sensor Control )
17 µs
(increment of xx µs steps)
Min. Time from End of Exposure to Start of
Next Exposure
24 lines – 14.26 µs
(67.34 µs)
Horizontal Line Time: 3.4 µs
Readout Time (H Line Time) x (lines in frame +23) — in μs
Auto-Brightness Yes, with Auto-Exposure and AGC (FPGA Gain or Sensor Gain)
Black offset control Yes (in DN)
Gain Control In-sensor Analog Gain (1.0x to 251x)
Binning Support Yes In-FPGA
(summing and average)
2x2, 4x4
Decimation Support No
Defective Pixel Replacement No
Image Correction no
Image Flip Support Yes, In-Sensor, Vertical and Horizontal
Multi-ROI Support Yes, In-Sensor, up to 16 ROI (mutually exclusive with in-sensor binning)
On-Board Image Memory 430MB
Output Dynamic Range (dB) 75.4 dB (in 8-Bit Pixel Format)
SNR (dB) 39.6 dB (in 8-Bit Pixel Format)
* Limited to the Genie Nano-5G Architecture:
~950MB/sec Sustained into the TurboDrive Engine achieved using 1500 Byte Packet Size