Dalsa Calibir 640 AB User Manual Download Page 31 | Manualshive

Page: 31 / 105

background image

Calibir 640 GigE IR Camera User's Manual

Features and Configuration Options

•

31

Overlays

The Calibir Series cameras can enable graphic overlays in the output image. Five overlays are

available: a black background bar, a reticle, an ROI, a false color map legend and a frame counter.

Each overlay can be individually selected and enabled/disabled. Their positions are always

configurable. A global overlay parameter allows for enabling/disabling all overlays.
The black background bar can be used to give better contrast for superimposed overlays to ensure

that graphic overlays are visible regardless of the image scene. Its size and position is configurable.
The reticles and ROI overlays can be used to highlight specific regions. Their colors are

configurable.
The false color legend indicates the relative intensity of the different colors.
The frame counter increments with each frame acquired and is reset when the acquisition is

stopped (therefore when snapping single frames the counter always reads 1).

Figure 10: Overlays

Note: Only the reticle and ROI overlays support color using the RGB related commands.

The height and width parameters are only used for the black background bar overlay.

Related GigE Vision Features

The overlayGlobalMode, overlaySelector, overlayEnable, overlayPositionX, overlayPositionY,

overlayWidth, overlayHeight, overlayColorR, overlayColorG and overlayColorB features control the

graphic overlays and are part of the Overlay Category. Note that only the reticle and ROI overlays

support color using the rgb related commands.

«
...
29
30
31
32
33
...
»

Summary of Contents for Calibir 640 AB










































































































Reviews:

No comments

Related manuals for Calibir 640 AB

Brand: laxihub Pages: 82

Brand: D-Link Pages: 24

DCS-3110 - SECURICAM Fixed Network Camera

Brand: D-Link Pages: 16

Brand: D-Link Pages: 12

Brand: D-Link Pages: 18

Brand: Samsung Pages: 98

Brand: Abus Pages: 6

Brand: Abus Pages: 88

Brand: Abus Pages: 119

Lorex LNC250 PING Series

Brand: FLIR Pages: 2

Brand: Peiying Pages: 44

Brand: Jenoptik Pages: 87

ClearSHOT 10 USB

Brand: VADDIO Pages: 17

Drive 750 Magnet

Brand: 2E Pages: 25

Lite VRDDN-2812Y60

Brand: Ganz Pages: 2

Brand: CNB Pages: 30

Brand: Netatmo Pages: 9

Brand: F&V Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands