![background image](http://html1.mh-extra.com/html/dallmeier/dis-1-s/dis-1-s_operating-manual-installation-and-configuration_3324103053.webp)
53
Dallmeier electronic GmbH & Co.KG
8.2.4
Contact Start / Stop
With the setting Contact Start / Stop, recording is started with one contact
and stopped with another contact.
It is also possible to perform the starting and stopping with only one
contact. Depending on the type of contact (break or make) you must
invert one of the two signals (mark the checkbox Invert signal !).
Recording then runs when the contact is pressed, and stops again
when you release the contact.
Settings
!
Open the tab Contact start/stop.
!
In the Start contact box, select the contact
for starting recording.
!
In the Stop contact box, select the contact
for stopping contact.
Please check the contact assignment of Contact
IN in the appendix.
8.2.5
IR Start / Stop
With the setting IR Start/Stop, recording can be controlled through an
external keyboard.
The receiver for the IR keyboard is connected to
the IR port at the rear of the DIS.
This function is not yet supported.
Diagram. 8-14
Diagram. 8-15