60
DIS-1/S and DIS-1/L
Dallmeier electronic GmbH & Co.KG
You can also set a number of different recording
modes in the weekly plan.
The way that this is done is always the same:
1) Select the recording mode by clicking on the
corresponding button.
2) Specify the time period either with a single
click or by drawing a rectangle.
8.3.2
Deactivating recording
The system’s recording function can always be stopped by marking a
certain time period in the weekly plan with the not active function.
There are two different ways of deactivating recording for a specified time
period:
1) Click on the not active button and then specify the time period in the
way described above.
2) Specify the time area with the right mouse button.
If you use the right mouse button the corresponding time area will
always be marked as not active, even if the button for not active is
not pressed.
All settings are implemented by clicking on OK.
Important!
If you click on Cancel, none of the settings made will be implemented.
All settings made before the last time the Scheduler dialog box was
opened will, however, be retained.
Diagram. 8-28