41
Dallmeier electronic GmbH & Co.KG
To access the SeMSy configuration dialog box, go to
Common settings > SeMSy configuration
Once you have activated Encoder for SeMSy available in the SeMSy
configuration dialog box, the coded data can be transferred over the network
by the management system. Here you can now specify to which other DIS
this coded signal is to be transferred and decoded for viewing on a monitor.
At this „receiving DIS“, Decoder for SeMSy available must be activated
in the SeMSy configuration, as this otherwise will reject access to the
decoder.
If a DIS is to transmit coded data as well as receive and decode data, both
rights need to be activated.
In the above example, images can be retrieved from DIS no. 1 and 3 and
read in at DIS no. 2 and 3.
Diagram. 7-23
Diagram. 7-24
Diagram. 7-25
DIS No.1
DIS No.2
DIS No.3
#
#
#
#
#
Encoder available
$
$
$
$
$
Decoder available
$
$
$
$
$
Encoder available
#
#
#
#
#
Decoder available
#
#
#
#
#
Encoder available
#
#
#
#
#
Decoder available
LAN / WAN
Management System
