9
Dallmeier electronic GmbH & Co.KG
The following safety instructions are to be observed at all times during the
installation and operation of the DIS.
Protection against unauthorised use
The system memory contains personal data subject to data protection law.
Data protection law must always be observed when operating the DIS.
The system (including monitor, mouse, etc.) should be installed in a secure
room, inaccessible to unauthorised persons. If you call up data from the
DIS - whether using the export or print functions - be sure to keep it in a
safe place. Destroy all data as soon as it is no longer needed. Only pass
on information concerning your DIS to selected and authorised persons.
Safe use
Ensure that all technical requirements and conditions for operation are met.
The safe operation of the DIS can only be guaranteed when the housing is
closed (radio interference suppression and fire protection). Only those
accessories, appliances, or upgrading components recommended and tested
by the manufacturer should be used with the DIS.
Precautionary Measures
The system and all related appliances comply with the relevant safety
regulations for information technology equipment.
Transport and shipping of the DIS
Always use either the original packing or alternative other suitable packing
for the transport of the DIS and any additional components. The packing
must provide adequate protection against transport damage and weather.
Protection of the appliance against condensation
If the DIS is brought directly from a cold environment into a warm room,
there is a possibility that condensation may form inside the DIS. Therefore
always wait for 1-2 hours (for the condensation to evaporate) before
putting the appliance into operation.
2
Safety Instructios