dallmeier DDF4510HDV-IM, Installation And Configuration Manual

Page: 12 / 105

DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com 12
3.6 Performance Features
The following list of features is valid for all devices described in this document.
• 1/2.5" 5-megapixel CMOS image sensor with Dallmeier technology
• Pure Digital Signal Processing
• Real-time HD video
• High light sensitivity of 0.59 lux (at F0.95, 50 IRE)
• Video compression: H.264, MJPEG
•
Frame rate up to 30 fps
• Simultaneous Dual- or Tri-Streaming
• Automatic White Balance (ATW, One-Push AWB)
• Automatic Gain Control (AGC)
• Automatic Electronic Shutter (AES)
•
Comprehensive set of image optimization functions, such as brightness,
contrast, saturation and sharpness
• 3D Digital Noise Reduction (3D DNR)
• Three different exposure metering modes:
average metering (light information from entire scene),
centre-weighted average metering and spot metering
• Privacy Zone Masking (hiding/masking of protected areas)
• Flip function (horizontal, vertical or both)
•
Digital Image Shift
1)
• Alarm notification via e-mail and FTP image upload
•
Hybrid IP camera with analogue preview output
• Audio OUT
2)
/ Microphone IN
2)
• Voltage supply with 12 V DC or via PoE (Class 0, IEEE 802.3af)
• Low power consumption (max. 4.5 W)
•
ONVIF compliant
• DIN EN 50130-4 compliant
For device-specific features, see the relevant product data sheet.
1) Provides digital fine alignment of image section (only applicable at resolutions less than 5 MP)
2) Audio IN/OUT Y-Cable Connector FGA-30 required (optionally available).