DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com
98
18 Technical Data
The following basic technical data was valid at the time of this document’s compilation.
Detailed specifications and possible updates for each device can be found in the corre
-
sponding current product data sheet on www.dallmeier.com.
The following specifications are valid for all devices described in this document, unless
otherwise indicated.
Specifications
Sensor
1/2.5" 5-megapixel CMOS image sensor
with Dallmeier
technology
Lens mount
CS-mount
Auto iris control
Compatible with DC drive auto iris lenses
Video output
1× BNC:
CVBS, analogue SD video preview output,
for local installation only
Audio OUT / Microphone IN
(each mono signal)
1× 3.5 mm phone jack (for stereo plug)
Microphone IN:
max. 63 mV (RMS),
input resistance 10 kOhm,
internal gain 20 dB
Ethernet
1× RJ45 jack, 10BASE-T/100BASE-TX PoE
Voltage supply
12 V DC ±10% or via PoE (Class 0)
PoE standard
IEEE 802.3af
Power consumption
Max. 4.5 W
Dimensions box cameras (w/o lens)
Approx.
W 71 × H 66 × L 118 mm
(W 2.8 × H 2.6 × L 4.6 inches)
Dimensions dome cameras
In-ceiling mount variants:
approx. Ø 170 × H 135 mm (Ø 6.7 × H 5.3 inches)
Surface mount variants:
approx. Ø 153 × H 135 mm (Ø 6.0 × H 5.3 inches)
Weight box cameras (w/o lens)
Approx. 300 g (0.7 lb)
Weight dome cameras
In-ceiling mount variants:
approx. 1200 g (2.6 lb)
Surface mount variants:
approx. 1100 g (2.4 lb)
Mechanical adjustment
3-axis (dome cameras only)
Operating temperature box cameras −10 °C to +45 °C (14 °F to 113 °F)
Operating temperature dome cameras In-ceiling mount variants (indoor):
0 °C to +35 °C (32 °F to 95 °F)
Surface mount variants (indoor and outdoor):
−10 °C to +40 °C (14 °F to 104 °F)
Relative humidity
0 % – 90 % RH, non-condensing
IP rating
IP67 (dome cameras surface mount variants only)
(dome cameras only)
IK10 (EN 62262, IEC 62262:2002)
Approvals/certifications
CE, FCC, ACA, UVV-Kassen (DGUV Test),
DIN EN 50130-4 compliant
6) Audio IN/OUT Y-Cable Connector FGA-30 required (optionally available)
7)
Protection against external mechanical impacts
