DF4510HD | DF4910HD | DDF4510HDV-IM/-SM | DDF4910HDV-IM/-SM
www.dallmeier.com
63
10.5
Encoder Settings
The audio and video encoding is configured in the
encoder settings
dialogue.
This dialogue may be locked by external devices/applications.
Note that the produced camera images can be recorded in the “Motion” recording mode
(image comparison) by Dallmeier recorders of the DMS and VNB series (as of version
7.1.1).
For this, the Encoder 1, which has to be set to H.264 encoding, is used.
Encoder 2 and 3 are then automatically disabled.
In addition to the recording, a second stream from Encoder 1 can be used for the live
display if Encoder 1 is set to a bit rate not higher than 6 MBit.
10.5.1
Encoder 1
Open the
encoder settings
dialogue via
Video
>
encoder settings ...
.
The
encoder 1
tab is displayed.
Fig. 10-6
Note the explanations below.
Activate the
3D noise filter
if required.
Select the encoding standard from the drop-down list
encoder mode
.
Select the frame rate from the drop-down list
Frames/Second
.
Select the
Resolution
(width × height in pixels).
Select the
Bitrate
.
Select the
Bitrate mode
.
Select the
GoP-size
(only with H.264).
Finally, confirm with
oK
.
