CEILING MOUNTED CASSETTE TYPE
Round Flow
Quick and easy to install
Just 256 mm high. Installable in tight
ceiling spaces
(71K)
Unified square panels
Compact body and quiet operation
*Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room.
**Wireless remote controller does not have a temperature-sensor.
Note : Anechoic chamber
conversion value, measured
according to JIS parameters
and criteria. During
operation these values are
somewhat higher owing to
ambient conditions.
Note: Air direction is set to the standard position when the unit is shipped from the factory.
The position can be changed from the remote controller.
Panel size is the same for all models, FCQN71-140K.
It is easy to maintain a neat appearance when multiple
units are installed in the same room.
Optimal comfort and convenience
assured by air discharge modes
Both indoor unit and wired remote controller (option
(BRC1E61)
) contain
temperature- sensors. Temperature sensing can be set at the unit or, to
further improve comfort level, closer to the target area at the wired remote
control. This feature requires initial setting by the installer.
Two selectable temperature-sensors
Even in spaces with high ceilings, a comfortable airflow is carried down to
the floor level.
Hot start (after defrost)
Suitable for high ceilings
Timer selector
Indoor unit
High
Low
125K
44
34
140K
44
36
100K
43
32
71K
35
28
dB(A)
Same for
all models
Air direction
Auto air
direction control
Settable to 5 different
levels between 15
°
and 60
°
Settable to 5 different
levels between 25
°
and 60
°
Auto-swing between
15
°
and 60
°
Auto-swing between
25
°
and 60
°
Recommended for shops with
light coloured ceilings that
must be kept spotless.
Standard setting to
prevent draft.
Standard setting
Setting to prevent soiling of ceiling
*
At heating startup and thermo OFF, air discharge
is automatically set to a near horizontal 25˚ or 30˚
to prevent direct exposure to cool air drafts.
Desired
situation
Auto-swing
5-levels
air direction
setting
Draft prevention
(In heating mode)
*Closing of the corner discharge outlets is recommended.
Number of air discharge outlets used
71K
4-way
flow
3-way
flow
2-way
flow
4-way
flow
3-way
flow
2-way
flow
100K–140K
3.1 m
3.4 m
4.0 m
All round
flow
2.7 m
3.0 m
3.5 m
3.0 m
3.3 m
3.5 m
3.5 m
3.8 m
-
3.4 m
3.9 m
4.5 m
All round
flow
3.2 m
3.6 m
4.2 m
3.6 m
4.0 m
4.2 m
4.2 m
4.2 m
-
Standard
Ceiling
height
High ceiling
High ceiling
Criteria for ceiling height and number of air discharge outlets
950
mm
950
mm
Note: Factory settings are for standard ceiling height and all-round flow.
High ceiling settings (1) and (2) are set with the remote controller.
256 mm
*
1
265 mm
*
2
*1 298 mm high with 100K–140K
*2 303 mm high with 100K–140K
All models can be installed without
using lifter because of the light weight.
Easier connection with the centralised
control system
Drain pump is equipped as standard
accessory with 850 mm lift.
Transparent drain
socket
Each corner of the unit has an Adjuster Pocket that
lets you easily adjust the unit's suspended height.
Since the orientation of
the intake grill can be
adjusted after installing,
the direction of the intake
grill lines can be unified
when multiple units
are installed.
Note: If the wireless remote control option is installed, a light receptor
unit is housed in one of the adjuster pockets.
Easy height adjustment
Can be installed in
any direction
The air direction is set automatically to the
memorised position of the previous air direction.
Switchable fan speed: High/Low
175 mm
850 mm
Low gas pressure detection
3
