LCD REMOTE CONTROLLER
Central remote controller
Interface adaptor for SkyAir series
Easily adaptable to large-scale, high-function, centralised remote control system.
Centralised control, with a setting as
simple as it is with a standard
remote controller, of up to 64 groups
(1,024 indoor units) is possible.
DCS302CA61
(Option)
DTA112BA51
(Option)
With its high functionality, the full
colour “all-in-one” graphic controller
facilitates management of SkyAir
System in a variety of ways.
DCS601C51
(Option)
Unified on/off controller
Centralised control of on/off by
group or all at once for up to 256
indoor units.
DCS301BA61
(Option)
Schedule timer
Unified control of weekly schedule
for up to 1,024 indoor units.
DST301BA61
(Option)
Schedule timer sets on/off time in 1 minute units
to be executed twice a day for a week at a time.
Simple system provides a diverse assortment of control modes.
Control by 1
remote controller
Control pattern
Wired remote controller
Wireless remote controller
Control by 2
remote controllers
Group control
Control by
external command
Centralised remote
control
Interlock control
with Heat Reclaim
Ventilator
(Basic system)
Link by remote
controller group control.
Zone link control by
centralised control.
For control from 2
locations such as in
room and control room,
exits, etc.
For simultaneous
control of up to 16
indoor units.
Centralised control of
up to 64 indoor groups
from remote location
up to 1 kilometer away.
Not possible
Signal receiver unit installed
on indoor unit
Heat Reclaim Ventilator for indoor units within a zone are operated by
interlocking. Can also be operated independently by remote controller.
Central remote controller (option)
Heat Reclaim
Ventilator
Can be operated simultaneously
or independently by remote controller
(set by ventilation mode)
Heat Reclaim
Ventilator
Central remote controller (option)
Non-polar, double-core
(max. wiring length 500 m)
Connects 2 wired
remote controllers
Automatic address setting function
Automatic address setting function
Signal receiver unit installed
on 1 indoor unit
Optional wiring adaptor for
electrical appendices is necessary
Central remote controller (option)
Can be operated simultaneously
by remote controller
(set by ventilation mode)
Heat Reclaim
Ventilator
Heat Reclaim Ventilator for indoor units within
a zone are operated by interlocking
Central remote controller (option)
Heat Reclaim
Ventilator
Operation and
surveillance is carried out
using the contact signal
from the operation control
box in the building
surveillance (security)
room.
Optional wiring adaptor for
electrical appendices is necessary
Optional SkyAir series interface
adaptor required.
Optional SkyAir series interface
adaptor required.
Note: When a wireless remote controller is used, remote control by two remote controllers is not possible.
Enables centralised control via connection
to a high-speed, DIII-NET communication
system, adopted for the Daikin VRV system.
Necessary for interface adaptor for SkyAir series with the
central remote control units shown at above.
The interface adaptor for the SkyAir series is
optional except for the ceiling mounted cassette
type.
9
