Use the temperature-sensor in the
indoor unit when controlling air
conditioning from another room.
Temperature-sensors are included in the indoor unit and
optional wired remote controller. Temperature sensing closer
to the target area is possible to
further increase the comfort
level.
Note: Wireless remote controllers have no
temperature-sensor.
Abundance of features that provide comfortable
air-conditioning in stores and offices.
The air flow direction can be fixed
at your desited angle by the
remote controller.
Dehumidification is a microprocessor controlled to prevent
abrupt and uncomfortable changes in air temperature. Useful
for reducing uncomfortable humidity without uncomfortable
cooling of the room.
Delivers comfortable air-
conditioning to all areas,
near to and far from the air-
conditioner.
High setting provides maximum reach while low setting
minimises drafts.
Auto-swing
Programme "Dry" with a humidity sensor
Switchable fan speed
(1) Air direction in
standard setting
(2) Air direction in ceiling
soiling prevention
setting
(standard, ceiling soiling prevention)
Note:When units are installed on high ceilings, depending on the model,
various restrictions concerning maximum height, air discharge direction,
and choice of options may apply.
You can freely set 2 air discharge settings by remote controller.
Swing pattern selection
Delivers air-conditioning comfort all the way down to the floor
in air-conditioning zones with high ceilings.
High-ceiling application
Draft prevention function
(heating)
Efficient cooling even in winter when the indoor temperatures
are higher than those outside, such as in underground public
spaces or offices with many computers.
Year-round cooling applicable
Operation starts when the preset time of the ON timer elapses
and stops when the preset time of the OFF timer elapses.
Timer selector
Up to five operation ON/OFF settings can be programmed per
day for each day of the week. Not only can the time be set for
the operation ON setting, but also the temperature.
Weekly schedule timer
Cold air flow is avoided when heating operation starts or
when switching to heat after defrosting.
Hot start
(after defrost)
Two selectable temperature-sensors
Drain pan has silver ion anti-bacterial treatment to help
prevent the growth of bacteria and mould.
Silver ion anti-bacterial drain pan
The Air filter has a anti-bacterial treatment to help prevent
the growth of bacteria and mould on it.
Anti-bacterial air filter
C o m f o r t
Cleanliness
To prevent cold air drafts, automatically adjusts airflow to near
horizontal position when heating initially starts or when the
thermostat turns off.
The Automatic night quiet mode will initiate 8 hours after the
peak temperature is reached in the daytime, and normal
operation will resume 10 hours after that.
Night quiet operation
10
