English
10
3. Clean the filter.
Clean the contamination with a vacuum cleaner
or wash it with water.
NOTE
• Do not wash the air filter with water of 50°C or
higher.
It may cause decolorization and deformation.
• Do not heat the filter with fire.
It may cause burning.
4. Attach the air filter.
Attach the air filter in the reverse order
mentioned in step 2.
5. Close the suction grille.
Simultaneously slide the two knobs, slowly lift
the suction grille and securely fix it in the reverse
order mentioned in step 1.
6. Turn off the indication "
" or "Time to
clean filter" displayed on the remote
controller after turning on the power.
•
For details, refer to the operation manual
attached to the remote controller.
The indication can be turned off whether in
operation or at stop.
NOTE
•
When closing the suction grille, the strap is likely
to be sandwiched.
Before closing the suction grille, confirm if the
strap is not sticking out from the side of the
suction grille.
If the air filter is
extremely
contaminated,
wash it with
neutral detergent
using a soft brush.
After dewatering,
dry the air filter in
the shade.
a
Strap
b
Suction grille
a
b
HOW TO CLEAN THE SUCTION GRILLE
1. Open the suction grille.
Simultaneously slide the two knobs, slowly down
the suction grille.
2. Remove the suction grille.
1
Remove the 4 straps attached to the indoor
unit. (Refer to the figure shown below.)
2
Open the suction grille to 45° and lift it. Then,
unhook it from the place to hook. (3 places)
3. Take out the air filter.
Refer to step 2 of "
4. Clean the suction grille.
Wash the suction grille with neutral detergent
using a soft brush and then dewater.
a
knob
a
Place where the straps are to be hooked (A total of
4 places)
b
Place to hook (3 places)
c
Unhook the hook
d
Place where the straps are to be hooked
Detergent
a
a
a
b
c
d
4PEN465543-1D.book Page 10 Monday, February 25, 2019 9:26 AM