Daikin REYQ-XA, Service Manual

Page: 235 / 441

SiUS371901E Field Settings for Outdoor Unit
Field Settings and Test Operation 222
Image of operation in the case of A and B
2.7.3 Setting Procedure of Night-Time Low Noise Operation and Demand
Control
1. Setting mode 1 (H1P OFF)
In setting mode 2, press the MODE (BS1) button once
→
Setting mode 1 is entered and H1P turns OFF.
While the setting mode 1 is displayed, In night-time low noise operation and In demand control are
displayed.
2. Setting mode 2 (H1P ON)
(1) In setting 1, press and hold the MODE (BS1) button for more than 5 seconds.
→
Setting mode 2 is entered
and H1P lights.
(2) Press the SET (BS2) button several times and match the LED display with the Setting No. you want.
(3) Press the RETURN (BS3) button once, and the present setting content is displayed.
→
Press the SET (BS2) button several times and match the LED display with the setting content you want.
(4) Press the RETURN (BS3) button two times.
→
Returns to (1).
(5) Press the MODE (BS1) button once
→
Returns to the setting mode 1 and H1P turns OFF.
The power consumption set with
Demand 1 level setting .
+
Demand level
2 instructing
+
Demand level
3 instructing
The power
consumption can
be set with the
Demand 1 level
setting
. (70% of
rated power
consumption has
been set at
factory.)
+
During continuous
demand operation, when
the external demand
instruction is received
repeatedly, the instruction
with higher demand level
has the precedence.
Power consumption
Rated
Forced thermostat OFF
(Fan operation)
40%
70%