Daikin MicroTech Operation And Maintenance Download

Page: 73 / 78

Appendix – Local User Interface (LUI)

www.DaikinApplied.com 73

OM 1280-2 • MICROTECH UNIT CONTROLLER

Menu Name

(Menu Index)

Minimum Password to Read

(None, User, Manager, Technician)

Minimum Password to Write

(None, User, Manager, Technician)

“RO” if Read Only

Help Text

NetEcon:

LonWorks unit status Economizer

NetFan:

LonWorks unit status Fan Out.

Set|BACnet

NdAddr:

MSTP node address.

DevInst:

MSTP device instance.

MSTPBaud:

MSTP baud rate.

DevName:

MSTP device name.

Loc:

Location of unit.

MSTPMaxMstr:

MSTP max masters on network.

MSTPInfoFr:

MSTP max info frames.

MeasUnits:

BACnet measurement units.

MinInst:

System Min Inst is DevInst.

Set|LonWorks

SndHrtBt:

LonWorks send heartbeat.

RcvHrtBt:

LonWorks receive heartbeat.

MnTimeOut:

LonWorks minimum send.

Set|Schedule
Set|Clock

SetYear:

Set the current year.

SetMonth:

Set the current month.

SetDate:

Set the current date.

SetHour:

Set the current hour.

SetMinute:

Set the current Minute.

SetSecond:

Set the current Second.

Day:

Current day of week.

Set|Daylight Saving

DSTEnable:

Daylight savings time enable.

BeginMonth

Daylight savings time begin month.

BeginWeek

Daylight savings time begin week.

EndMonth

Daylight savings time end month.

EndWeek

Daylight savings time end week.

SunOccHr1:

Sunday occupied 1 hour.

SunOccMin1:

Sunday occupied 1 minute.

SunUnoccHr1:

Sunday unoccupied 1 hour.

SunUnoccMin1:

Sunday unoccupied 1 minute.

SunOccHr2:

Sunday occupied 2 hour.

SunOccMin2:

Sunday occupied 2 minute.

SunUnoccHr2:

Sunday unoccupied 2 hour.

SunUnoccMin2:

Sunday unoccupied 2 minute.

Set|Sched|Days|Mon

MonOccHr1:

Monday occupied 1 hour.

MonOccMin1:

Monday occupied 1 minute.

MonUnoccHr1:

Monday unoccupied 1 hour.

MonUnoccMin1:

Monday unoccupied 1 minute.

MonOccHr2:

Monday occupied 2 hour.

MonOccMin2:

Monday occupied 2 minute.

MonUnoccHr2:

Monday unoccupied 2 hour.

MonUnoccMin2:

Monday unoccupied 2 minute.

Set|Sched|Days|Tue

TueOccHr1:

Tuesday occupied 1 hour.

TueOccMin1:

Tuesday occupied 1 minute.

TueUnoccHr1:

Tuesday unoccupied 1 hour.

TueUnoccMin1:

Tuesday unoccupied 1 minute.

TueOccHr2:

Tuesday occupied 2 hour.

TueOccMin2:

Tuesday occupied 2 minute.

TueUnoccHr2:

Tuesday unoccupied 2 hour.

TueUnoccMin2:

Tuesday unoccupied 2 minute.

Set|Sched|Days|Wed

WedOccHr1:

Wednesday occupied 1 hour.

WedOccMin1:

Wednesday occupied 1 minute.

WedUnoccHr1:

Wednesday unoccupied 1 hour.

WedUnoccMin1:

Wednesday unoccupied 1 minute.

WedOccHr2:

Wednesday occupied 2 hour.

WedOccMin2:

Wednesday occupied 2 minute.

WedUnoccHr2:

Wednesday unoccupied 2 hour.

WedUnoccMin2:

Wednesday unoccupied 2 minute.

Summary of Contents for MicroTech















































































Search results

Summary of Contents for MicroTech

Reviews:

Related manuals for MicroTech

Brands by name

Popular brands

Daikin MicroTech, Operation And Maintenance

Search results

Summary of Contents for MicroTech

Reviews:

Related manuals for MicroTech

Brands by name

Popular brands