English
14
To change the air
fl
ow manually
Air
fl
ow manual operation
Press
.
Each time the button is pressed, the air
fl
ow rate changes
•
as follows.
“
(Quiet)”
“ (Low)”
“ (Standard)”
“
(High)”
To clean pollen
Anti-pollen operation
Press
.
To operate quietly when you are sleeping
Sleep mode operation
Press
.
The sleep mode operation lamp and one of the
•
air
fl
ow rate lamps “
(Quiet)” or “ (Low)” light
up.
To change the brightness of the unit display lamp
Press
.
The brightness of the unit display lamp
•
changes each time the button is
pressed.
It is only the air quality sensor lamp
•
and the odour sensor lamp which
completely go off.
< Air quality sensor lamp /
Odour sensor lamp >
Bright
Dimmed
OFF
< Other display lamp >
Bright
Dimmed
Dimmed
NOTE
Do not start or stop operation by disconnecting or reconnecting the power plug
•
except in the case of malfunction.
Do not move the unit during operation.
•
It may cause operational issues or malfunction.
ATTENTION
Operation stops for safety when the front panel is
•
opened during operation.
When any malfunction occurs during
operation
If the unit display is abnormally lit or the signal from
•
the remote controller can not be received during
operation due to electric lighting or radio
interference, disconnect the power plug once. After
3 seconds or more, reconnect the power plug and
start operation.
Start / Stop
The default setting for the air
fl
ow rate is “
•
(Auto
fan)” air
fl
ow. When you disconnect the power plug or
remove the front panel, the setting for the air
fl
ow rate
returns to “Auto fan”.
Before cleaning, make sure to stop operation and
•
disconnect the power plug.
Auto fan operation
The air
fl
ow rate is automatically selected from “
•
(Quiet)”, “ (Low)”, “ (Standard)”, or “
(High)”
according to the uncleanness level of the air.
The purifying capacity improves as the air
fl
ow rate
•
increases.
Turbo operation
A high air
fl
ow rate quickly removes any contaminants
•
in the air. This is convenient to use when cleaning
the room.
Quiet operation
A gentle
fl
ow of air is discharged. Use this operation
•
especially while sleeping.
During the quiet operation, the deodorising
performance decreases. If the room is not
deodorised well, please use the “Standard” or
stronger operation mode.
Anti-pollen operation
The air
fl
ow rate switches over between
•
“ (Standard)” and “ (Low)” every 5 minutes and
produces a moderate air stream to catch the pollen
before it drops on the
fl
oor.
Sleep mode operation
The air
fl
ow rate is automatically selected from “
•
(Quiet)” or “ (Low)” according to the cleanliness
level of the air.
This is convenient to use when sleeping.
•
Timer operation
The remaining time is indicated by the OFF TIMER
•
lamp.
The set time can also be changed when the button is
•
pressed while the timer is counting.
Childproof lock
While the lock is engaged, the operation of the unit
•
and the remote controller are limited to prevent small
children from mishandling them.
Operation with the button on the unit
Press
.
The operation mode changes each time the button is pressed.
•
“
(Auto fan)”
“
(Quiet)”
“ (Low)”
“ (Standard)”
“Stop”
“
(Sleep mode)”
“
(Anti-pollen)”
“
(Turbo)”
“
(High)”
01_EN_3P276413-2C.indd 14
01_EN_3P276413-2C.indd 14
9/27/2011 1:20:24 PM
9/27/2011 1:20:24 PM
